3 files changed, 281 insertions, 132 deletions

diff --git a/lib/lua/CMakeLists.txt b/lib/lua/CMakeLists.txt
new file mode 100644
index 000000000..526be7a46
--- /dev/null
+++ b/lib/lua/CMakeLists.txt
@@ -0,0 +1,29 @@
+
+cmake_minimum_required (VERSION 2.6)
+project (lua)
+
+include_directories ("${PROJECT_SOURCE_DIR}/../../src/")
+
+file(GLOB SOURCE
+	"*.c"
+)
+
+list(REMOVE_ITEM SOURCE "${PROJECT_SOURCE_DIR}/lua.c")
+
+if ((${CMAKE_GENERATOR} MATCHES "Unix Makefiles") AND (NOT LUA_CMAKE_BUILD))
+	if(NOT ${PROJECT_SOURCE_DIR} MATCHES ${PROJECT_BINARY_DIR})
+		message(WARNING "lua does not support prefix when using the makefile")
+	endif()
+	ADD_CUSTOM_COMMAND(
+   OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/lua
+   COMMAND "make"
+   DEPENDS ${SOURCE}
+   )
+
+
+else()
+	message("generator [${CMAKE_GENERATOR}] does not match Unix Makefiles so manually compiling lua") 
+
+	add_library(lua ${SOURCE})
+
+endif()
diff --git a/lib/lua/Makefile b/lib/lua/Makefile
index 6e78f66fa..e8040df73 100644
--- a/lib/lua/Makefile
+++ b/lib/lua/Makefile
@@ -1,128 +1,119 @@
-# makefile for installing Lua
-# see INSTALL for installation instructions
-# see src/Makefile and src/luaconf.h for further customization
-
-# == CHANGE THE SETTINGS BELOW TO SUIT YOUR ENVIRONMENT =======================
-
-# Your platform. See PLATS for possible values.
-PLAT= none
-
-# Where to install. The installation starts in the src and doc directories,
-# so take care if INSTALL_TOP is not an absolute path.
-INSTALL_TOP= /usr/local
-INSTALL_BIN= $(INSTALL_TOP)/bin
-INSTALL_INC= $(INSTALL_TOP)/include
-INSTALL_LIB= $(INSTALL_TOP)/lib
-INSTALL_MAN= $(INSTALL_TOP)/man/man1
-#
-# You probably want to make INSTALL_LMOD and INSTALL_CMOD consistent with
-# LUA_ROOT, LUA_LDIR, and LUA_CDIR in luaconf.h (and also with etc/lua.pc).
-INSTALL_LMOD= $(INSTALL_TOP)/share/lua/$V
-INSTALL_CMOD= $(INSTALL_TOP)/lib/lua/$V
-
-# How to install. If your install program does not support "-p", then you
-# may have to run ranlib on the installed liblua.a (do "make ranlib").
-INSTALL= install -p
-INSTALL_EXEC= $(INSTALL) -m 0755
-INSTALL_DATA= $(INSTALL) -m 0644
-#
-# If you don't have install you can use cp instead.
-# INSTALL= cp -p
-# INSTALL_EXEC= $(INSTALL)
-# INSTALL_DATA= $(INSTALL)
-
-# Utilities.
-MKDIR= mkdir -p
-RANLIB= ranlib
-
-# == END OF USER SETTINGS. NO NEED TO CHANGE ANYTHING BELOW THIS LINE =========
-
-# Convenience platforms targets.
-PLATS= aix ansi bsd freebsd generic linux macosx mingw posix solaris
-
-# What to install.
-TO_BIN= lua luac
-TO_INC= lua.h luaconf.h lualib.h lauxlib.h ../etc/lua.hpp
-TO_LIB= liblua.a
-TO_MAN= lua.1 luac.1
-
-# Lua version and release.
-V= 5.1
-R= 5.1.4
-
-all:	$(PLAT)
-
-$(PLATS) clean:
-	cd src && $(MAKE) $@
-
-test:	dummy
-	src/lua test/hello.lua
-
-install: dummy
-	cd src && $(MKDIR) $(INSTALL_BIN) $(INSTALL_INC) $(INSTALL_LIB) $(INSTALL_MAN) $(INSTALL_LMOD) $(INSTALL_CMOD)
-	cd src && $(INSTALL_EXEC) $(TO_BIN) $(INSTALL_BIN)
-	cd src && $(INSTALL_DATA) $(TO_INC) $(INSTALL_INC)
-	cd src && $(INSTALL_DATA) $(TO_LIB) $(INSTALL_LIB)
-	cd doc && $(INSTALL_DATA) $(TO_MAN) $(INSTALL_MAN)
-
-ranlib:
-	cd src && cd $(INSTALL_LIB) && $(RANLIB) $(TO_LIB)
-
-local:
-	$(MAKE) install INSTALL_TOP=..
-
-none:
-	@echo "Please do"
-	@echo "   make PLATFORM"
-	@echo "where PLATFORM is one of these:"
-	@echo "   $(PLATS)"
-	@echo "See INSTALL for complete instructions."
-
-# make may get confused with test/ and INSTALL in a case-insensitive OS
-dummy:
-
-# echo config parameters
-echo:
-	@echo ""
-	@echo "These are the parameters currently set in src/Makefile to build Lua $R:"
-	@echo ""
-	@cd src && $(MAKE) -s echo
-	@echo ""
-	@echo "These are the parameters currently set in Makefile to install Lua $R:"
-	@echo ""
-	@echo "PLAT = $(PLAT)"
-	@echo "INSTALL_TOP = $(INSTALL_TOP)"
-	@echo "INSTALL_BIN = $(INSTALL_BIN)"
-	@echo "INSTALL_INC = $(INSTALL_INC)"
-	@echo "INSTALL_LIB = $(INSTALL_LIB)"
-	@echo "INSTALL_MAN = $(INSTALL_MAN)"
-	@echo "INSTALL_LMOD = $(INSTALL_LMOD)"
-	@echo "INSTALL_CMOD = $(INSTALL_CMOD)"
-	@echo "INSTALL_EXEC = $(INSTALL_EXEC)"
-	@echo "INSTALL_DATA = $(INSTALL_DATA)"
-	@echo ""
-	@echo "See also src/luaconf.h ."
-	@echo ""
-
-# echo private config parameters
-pecho:
-	@echo "V = $(V)"
-	@echo "R = $(R)"
-	@echo "TO_BIN = $(TO_BIN)"
-	@echo "TO_INC = $(TO_INC)"
-	@echo "TO_LIB = $(TO_LIB)"
-	@echo "TO_MAN = $(TO_MAN)"
-
-# echo config parameters as Lua code
-# uncomment the last sed expression if you want nil instead of empty strings
-lecho:
-	@echo "-- installation parameters for Lua $R"
-	@echo "VERSION = '$V'"
-	@echo "RELEASE = '$R'"
-	@$(MAKE) echo | grep = | sed -e 's/= /= "/' -e 's/$$/"/' #-e 's/""/nil/'
-	@echo "-- EOF"
-
-# list targets that do not create files (but not all makes understand .PHONY)
-.PHONY: all $(PLATS) clean test install local none dummy echo pecho lecho
-
-# (end of Makefile)
+# CMAKE generated file: DO NOT EDIT!
+# Generated by "Unix Makefiles" Generator, CMake Version 2.8
+
+# Default target executed when no arguments are given to make.
+default_target: all
+.PHONY : default_target
+
+#=============================================================================
+# Special targets provided by cmake.
+
+# Disable implicit rules so canonical targets will work.
+.SUFFIXES:
+
+# Remove some rules from gmake that .SUFFIXES does not remove.
+SUFFIXES =
+
+.SUFFIXES: .hpux_make_needs_suffix_list
+
+# Suppress display of executed commands.
+$(VERBOSE).SILENT:
+
+# A target that is always out of date.
+cmake_force:
+.PHONY : cmake_force
+
+#=============================================================================
+# Set environment variables for the build.
+
+# The shell in which to execute make rules.
+SHELL = /bin/sh
+
+# The CMake executable.
+CMAKE_COMMAND = /usr/bin/cmake
+
+# The command to remove a file.
+RM = /usr/bin/cmake -E remove -f
+
+# The top-level source directory on which CMake was run.
+CMAKE_SOURCE_DIR = /home/tycho/MCServer
+
+# The top-level build directory on which CMake was run.
+CMAKE_BINARY_DIR = /home/tycho/MCServer
+
+#=============================================================================
+# Targets provided globally by CMake.
+
+# Special rule for the target edit_cache
+edit_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running interactive CMake command-line interface..."
+	/usr/bin/cmake -i .
+.PHONY : edit_cache
+
+# Special rule for the target edit_cache
+edit_cache/fast: edit_cache
+.PHONY : edit_cache/fast
+
+# Special rule for the target rebuild_cache
+rebuild_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..."
+	/usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR)
+.PHONY : rebuild_cache
+
+# Special rule for the target rebuild_cache
+rebuild_cache/fast: rebuild_cache
+.PHONY : rebuild_cache/fast
+
+# The main all target
+all: cmake_check_build_system
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles /home/tycho/MCServer/lib/lua/CMakeFiles/progress.marks
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/all
+	$(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles 0
+.PHONY : all
+
+# The main clean target
+clean:
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/clean
+.PHONY : clean
+
+# The main clean target
+clean/fast: clean
+.PHONY : clean/fast
+
+# Prepare targets for installation.
+preinstall: all
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/preinstall
+.PHONY : preinstall
+
+# Prepare targets for installation.
+preinstall/fast:
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/lua/preinstall
+.PHONY : preinstall/fast
+
+# clear depends
+depend:
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1
+.PHONY : depend
+
+# Help Target
+help:
+	@echo "The following are some of the valid targets for this Makefile:"
+	@echo "... all (the default if no target is provided)"
+	@echo "... clean"
+	@echo "... depend"
+	@echo "... edit_cache"
+	@echo "... rebuild_cache"
+.PHONY : help
+
+
+
+#=============================================================================
+# Special targets to cleanup operation of make.
+
+# Special rule to run CMake to check the build system integrity.
+# No rule that depends on this can have commands that come from listfiles
+# because they might be regenerated.
+cmake_check_build_system:
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0
+.PHONY : cmake_check_build_system
+
diff --git a/lib/tolua++/Makefile b/lib/tolua++/Makefile
index 92ded6c4e..ca74d8b26 100644
--- a/lib/tolua++/Makefile
+++ b/lib/tolua++/Makefile
@@ -1,5 +1,134 @@
-# makefile for tolua hierarchy
+# CMAKE generated file: DO NOT EDIT!
+# Generated by "Unix Makefiles" Generator, CMake Version 2.8
+
+# Default target executed when no arguments are given to make.
+default_target: all
+.PHONY : default_target
+
+#=============================================================================
+# Special targets provided by cmake.
+
+# Disable implicit rules so canonical targets will work.
+.SUFFIXES:
+
+# Remove some rules from gmake that .SUFFIXES does not remove.
+SUFFIXES =
+
+.SUFFIXES: .hpux_make_needs_suffix_list
+
+# Suppress display of executed commands.
+$(VERBOSE).SILENT:
+
+# A target that is always out of date.
+cmake_force:
+.PHONY : cmake_force
+
+#=============================================================================
+# Set environment variables for the build.
+
+# The shell in which to execute make rules.
+SHELL = /bin/sh
+
+# The CMake executable.
+CMAKE_COMMAND = /usr/bin/cmake
+
+# The command to remove a file.
+RM = /usr/bin/cmake -E remove -f
+
+# The top-level source directory on which CMake was run.
+CMAKE_SOURCE_DIR = /home/tycho/MCServer
+
+# The top-level build directory on which CMake was run.
+CMAKE_BINARY_DIR = /home/tycho/MCServer
+
+#=============================================================================
+# Targets provided globally by CMake.
+
+# Special rule for the target edit_cache
+edit_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running interactive CMake command-line interface..."
+	/usr/bin/cmake -i .
+.PHONY : edit_cache
+
+# Special rule for the target edit_cache
+edit_cache/fast: edit_cache
+.PHONY : edit_cache/fast
+
+# Special rule for the target rebuild_cache
+rebuild_cache:
+	@$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --cyan "Running CMake to regenerate build system..."
+	/usr/bin/cmake -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR)
+.PHONY : rebuild_cache
+
+# Special rule for the target rebuild_cache
+rebuild_cache/fast: rebuild_cache
+.PHONY : rebuild_cache/fast
+
+# The main all target
+all: cmake_check_build_system
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles /home/tycho/MCServer/lib/tolua++/CMakeFiles/progress.marks
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/tolua++/all
+	$(CMAKE_COMMAND) -E cmake_progress_start /home/tycho/MCServer/CMakeFiles 0
+.PHONY : all
+
+# The main clean target
+clean:
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/tolua++/clean
+.PHONY : clean
+
+# The main clean target
+clean/fast: clean
+.PHONY : clean/fast
+
+# Prepare targets for installation.
+preinstall: all
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/tolua++/preinstall
+.PHONY : preinstall
+
+# Prepare targets for installation.
+preinstall/fast:
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/tolua++/preinstall
+.PHONY : preinstall/fast
+
+# clear depends
+depend:
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 1
+.PHONY : depend
+
+# Convenience name for target.
+lib/tolua++/CMakeFiles/tolua.dir/rule:
+	cd /home/tycho/MCServer && $(MAKE) -f CMakeFiles/Makefile2 lib/tolua++/CMakeFiles/tolua.dir/rule
+.PHONY : lib/tolua++/CMakeFiles/tolua.dir/rule
+
+# Convenience name for target.
+tolua: lib/tolua++/CMakeFiles/tolua.dir/rule
+.PHONY : tolua
+
+# fast build rule for target.
+tolua/fast:
+	cd /home/tycho/MCServer && $(MAKE) -f lib/tolua++/CMakeFiles/tolua.dir/build.make lib/tolua++/CMakeFiles/tolua.dir/build
+.PHONY : tolua/fast
+
+# Help Target
+help:
+	@echo "The following are some of the valid targets for this Makefile:"
+	@echo "... all (the default if no target is provided)"
+	@echo "... clean"
+	@echo "... depend"
+	@echo "... edit_cache"
+	@echo "... rebuild_cache"
+	@echo "... tolua"
+.PHONY : help
+
+
+
+#=============================================================================
+# Special targets to cleanup operation of make.
+
+# Special rule to run CMake to check the build system integrity.
+# No rule that depends on this can have commands that come from listfiles
+# because they might be regenerated.
+cmake_check_build_system:
+	cd /home/tycho/MCServer && $(CMAKE_COMMAND) -H$(CMAKE_SOURCE_DIR) -B$(CMAKE_BINARY_DIR) --check-build-system CMakeFiles/Makefile.cmake 0
+.PHONY : cmake_check_build_system
 
-all:
-	@echo "Makefile is deprecated ;)"
-	@echo "see INSTALL for details on how to build tolua++"